Gallery
1988 Sega Hot Rod 3 Player Upright Arcade Machine
A beautifully restored Sega Hot Rod 3 Player machine. Spared no expense on this very rare machine. The cabinet had just about every corner broken or cracked. The entire back panels where missing, cracked or badly patched. Decided to do a vertical...
1957 Williams Ten Strike Back Doors
This game was missing the 2 back doors. Made exact copies using our other machine as a template. Painted green later.
1957 Williams Ten Strike Playfield
The bottom of this playfield was burnt up pretty bad. Made new rails. Glued where it delaminated. Sanding and wood filler where needed, then a good coat of oil base paint.
1932 Mills Deluxe Official Pinball Machine
This was acquired in working condition, but had the wrong paint colors and was painted numerous times the wrong colors.
Full album with restored photos is
Lethal Enforcers Upright
This came in with a battered cabinet on both rear edges and the bottom edges. Repaired with new wood on the edges and a full repaint. New side art, marquee translite and control panel overlay was added. Added a RiddleTV 6 way switcher, with 3...
1988 Williams NARC
We did a full restoration on this machine. It had several corners broken and split wood sections that looked like it rolled down a flight of stairs. Applied black laminate to the front and sides. New CPO and side art. All new buttons and...
Mills High Top 25 Cent
This was a fun restoration. Love these old mechanical machines. Fully cleaned and rebuilt mechanism. Replaced springs where needed. Oak case has some cracks that needed to be glued and wood putty filled. Internally all metals where cleaned, lubed,...
1954 Genco Big Top Rifle Gallery
Did a cosmetic and electronic restoration on this one. The back half of the cabinet bottom was water damaged. Had to go through the entire game electronics for cleaning and adjustment. Repaired several targets as needed with popcicle sticks....
1989 Ivan Ironman Stewart's Super Off Road
This machine came in as a basket case with a lot of wood damage. We had to recreate the control panel and foot peddle board from scratch. New black laminate on all sides, rebuilt monitor, new buttons and all new art package. So much more was...
Gorf Control Panel Restoration
This was in pretty bad shape. The aluminum panel was heavily pitted and the joystick was held together with some odd screws and a nail.
Pac-Man Cabaret Laminate
This Pac-Man Cabaret turned out absolutely beautiful. Found a close matched wood grain laminate that works well on the Midway cabinets.
Atari Tempest Spinner Rebuild
Rebuilt our Tempest spinner, to get rid of that horid brrrr sound and to have smooth game play. Thanks to Arcade Tools in Anaheim California for their rebuild kit.
Nintendo Popeye Base
Duplicated a broken and partially missing base to our Nintendo Popeye machine.
Williams Upright Monitor Board
Duplicated a missing monitor board from our Williams Joust for a Williams Stargate machine.
Atari Trackball
Over 30 years of nastiness in every Centipede that we come across. Just wanted to show you the before and after with new bearings and shafts after a good cleaning.
John Deere 1 1/2 hp Hit and Miss Engine Cart
New Red Oak skids, from the House of Hardwood in Los Angeles. John Deere cart kit, from Lightning Magneto in Minnesota, Pacific Coast Powder Coating powder coated the John Deere colors.
VMC 88 Pepsi Machine
This machine was nice to start with, but it was only an exterior restoration. We went through the entire machine inside and out. Repairing the rust, and painting the Pepsi blue paint color matched to my same era cooler. Powder coated all the...
1957 Williams Ten Strike
The cabinet is an older restoration, however the playfield we did in 2012. All the electronics have been gone through, cleaned and adjusted.
1969 Midway Sea Raider
A beautiful fully restored machine. This has been gone through inside and out. The cabinet was repainted to original specs. All the electronics have been gone through.
1949 Bally Heavy Hitter Pinball Stand
This is an exact copy of an original stand that we made for a machine that we owned at one time. Thank you to Gene of Vintage Arcade Superstore for letting us borrow his original stand.
Coin Doors
Some powder coated doors we did for various machines. All hardware is gone through cleaned and made to look and work like it did when it was new.
1934 Genco Official Basball
This is an older restoration. Fully adjusted and working properly. Cabinet was painted to original specs.
1982 Bally Midway Tron
A fully restored Tron. However everything is original but the cabinet. The original cabinet was too far gone to restore. This is a new CNC cabinet to original specs. All new art package. Powder coated all the metals. Every nut, screw, nut and bolt...
1981 Midway Galaga
A fully restored Galaga. However everything is original but the cabinet. The original cabinet was too far gone to restore. This is a new CNC cabinet to original specs. All new art package. Powder coated all the metals. Every nut, screw, nut and...
1959 Williams Pinch Hitter
A beautiful fully restored Pinch Hitter machine. Has been completly gone through inside and out. Cabinet has been repainted. Metals have been powder coated and or painted to original specs. New reproduction backglass.
1979 Atari Asteroids
A fully restored early Asteroids machine. Every nut, bolt and washer has been refurbished, restored and or replaced to original specifications. All electronics have been gone through. The cabinet was stripped down to bare wood inside and out and...